CE Labs HSW44C Instruction Manual

LAUNAM NOITCURTSNI4x4 HDMI over CAT5 Matrixwith IR Pass-throughHSW44CCE labs can support many areas of your audio and videodistribution needs.We manuf

SW Main for firmware update (for technical support only) DIP Switch Position Pin 1 Pin 2 Pin 3 Pin 4 Normal Operation Mode6OFF [ ] OFF [ ] ON [ ]

MATRIX SIDEMethod A: Push Button1. Push the red switch button on output port to select which port to be changed.Method B: IR Remote Controla. Choo

HARDWARE INSTALLATION HSW44C as master1. Connect all sources to HDMI Inputs on the 4x4 HDMI over CAT5 matrix master HSW44C2. Connect each DDC

SAFETEY & NOTICEThe HSW44C 4x4 HDMI over CAT5 Matrix with IR Pass-through has been tested for conformance to safety regulations and requirements,

INTRODUCTION HDMI cable Two LAN cables4x HDTV4x HDMI Source HSMRPS3 Blu- ray Disc Player TiVo HDMI Camera IR controllerIR receiverHSMRH

• State-of-the-art Silicon Image (Founder of HDMI) chipset embedded for upmost compatibility and reliability • HDMI 1.3c compliant

EDID LEARNINGThe EDID learning function is only necessary whenever you encounter any display on the HDMI output port that cannot play audio

SPECIFICATIONS & PACKAGE CONTENTS1. The HSMR has been tested extensively and found that it doesn’t require external power supply. If in rare s

PANEL DESCRIPTIONSRS-232 transmission FormatBaud rate: 9600 Data bit: 8 Parity: None Set Command noitpircseDesnopseR edoC dnammoC TES KCA mu

HSMR 81523467Fast Select: Provide the fast setup be tween inputs and outputs of the matrix. “Channel 1” makes all outputs see input-1, same for the re

DIP SWITCHScan: Choose COM port number and Device ID for scan. Then tick “Scan Device ID”and press “Scan” button to know which COM port is connected b